Config EIGRP Router 1 & 2.txt

***In this example, it is assumed that the MPLS network is configured with the MPLS PE devices participating in the EIGRP process and virtual route forwarding. Only the client-side EIGRP configuration is shown here.*** R1 Router R1(config)#interface fastethernet0/0 Enters interface configuration mode R1(config-if)#ip address 192.168.1.2 255.255.255.252 Assigns the IP address and mask R1(config-if)#no shutdown Enables the interface R1(config-if)#router eigrp 100 Creates routing process 100 R1(config-router)#network 172.16.1.0 0.0.0.255 Advertises the network in EIGRP R1(config-router)#network 192.168.1.0 0.0.0.255 Advertises the network in EIGRP R2 Router R2(config)#interface fastethernet0/0 Enters interface configuration mode R2(config-if)#ip address 192.168.2.2 255.255.255.252 Assigns the IP address and mask R2(config-if)#no shutdown Enables the interface R2(config-if)#router eigrp 100 Creates routing process 100 R2(config-router)#network 172.17.2.0 0.0.0.255 Advertises the network in EIGRP R2(config-router)#network 192.168.2.0 0.0.0.255 Advertises the network in EIGRP