Config EIGRPv6 Router 1,2,3.txt

***Network Topology for EIGRP Configuration*** R1 Router R1>enable Enters privileged mode. R1#config t Moves to global configuration mode. R1(config)#router eigrp ConfigEG Creates a named EIGRP virtual instance called ConfigEG. R1(config-router)#address family ipv4 autonomous-system 1 Enables the IPv4 address family and starts EIGRP autonomous system 1. R1(config-router-af)#network 10.1.1.0 Enables EIGRP for IPv4 on interfaces in the 10.1.1.0 network. R1(config-router-af)#network 192.168.0.0 Enables EIGRP for IPv4 on interfaces in the 192.168.0.0 network. R1(config-router-af)#network 192.168.1.0 Enables EIGRP for IPv4 on interfaces in the 192.168.1.0 network. R1(config-router-af)#af-interface gigabitethernet0/0 Moves the router into the address family interface configuration mode for interface Gigabit Ethernet 0/0. R1(config-router-af- interface)#summary-address 192.168.0.0/23 Configures a summary aggregate address for the two serial prefixes. R1(config-router-af- interface)#exit Returns to address family configuration mode. R1(config-router-af)#exit Returns to EIGRP router configuration mode. R1(config-router)#address-family ipv6 autonomous-system 1 Enables the IPv6 address family and starts EIGRP autonomous system 1. All IPv6 enabled interfaces are included in the EIGRPv6 process. R1(config-router-af)#exit Returns to EIGRP router configuration mode. R1(config-router)#exit Returns to global configuration mode. R1(config)#exit Returns to privileged mode. R1#copy running-config startup- config Copies the running configuration to NVRAM. R2 Router R2>enable Enters privileged mode. R2#config t Moves to global configuration mode. R2(config)#router eigrp ConfigEG Creates a named EIGRP virtual instance called ConfigEG. R2(config-router)#address family ipv4 autonomous-system 1 Enables the IPv4 address family and starts EIGRP autonomous system 1. R2(config-router-af)#network 192.168.0.0 Enables EIGRP for IPv4 on interfaces in the 192.168.0.0 network. R2(config-router-af)#exit Returns to EIGRP router configuration mode. NOTE: The complete command is exit-address-family. R2(config-router)#address-family ipv6 autonomous-system 1 Enables the IPv6 address family and starts EIGRP autonomous system 1. All IPv6 enabled interfaces are included in the EIGRPv6 process. R2(config-router-af)#exit Returns to EIGRP router configuration mode. R2(config-router)#exit Returns to global configuration mode. R2(config)#exit Returns to privileged mode. R2#copy running-config startup- config Copies the running configuration to NVRAM. R3 Router R3>enable Enters privileged mode. R3#config t Moves to global configuration mode. R3(config)#router eigrp ConfigEG Creates a named EIGRP virtual-instance called ConfigEG. R3(config-router)#address family ipv4 autonomous-system 1 Enables the IPv4 address family and starts EIGRP autonomous system 1. R3(config-router-af)#network 192.168.1.0 Enables EIGRP for IPv4 on interfaces in the 192.168.1.0 network. R3(config-router-af)#exit Returns to EIGRP router configuration mode. NOTE: The complete command is exit-address-family. R3(config-router)#address-family ipv6 autonomous-system 1 Enables the IPv6 address family and starts EIGRP autonomous system 1. All IPv6 enabled interfaces are included in the EIGRPv6 process. R3(config-router-af)#exit Returns to EIGRP router configuration mode. R3(config-router)#exit Returns to global configuration mode. R3(config)#exit Returns to privileged mode. R3#copy running-config startup- config Copies the running configuration to NVRAM.